How to Use Mix n' Match Apparel Stickers on Gear

Quick answer

To get the best results from your Mix n' Match Apparel Stickers, clean the surface, apply carefully, and let them set before use.

Step-by-step guide to applying your stickers

1. Clean and dry the surface: Wipe the area with a mild soap or rubbing alcohol to remove oil and dust. Let it dry completely. A common mistake: applying stickers to a damp surface causes them to lift off within hours.
2. Peel and position carefully: Peel the sticker from its backing. Hold it by the edges to avoid fingerprints. Place it on the surface but do not press yet. Check alignment first. Common mistake: pressing down before checking position makes repositioning nearly impossible. Once the sticker touches the surface, it is hard to move without damage.
3. Smooth out air bubbles: Use a credit card or your thumb to gently press from the center outward. This pushes air to the edges. If a bubble remains, prick it with a pin and smooth again. Common mistake: pressing too hard can stretch the sticker and create creases.
4. Let the sticker set: Wait at least 24 hours before exposing the sticker to water or heavy handling. The adhesive needs time to bond fully. Common mistake: washing or using the gear too soon can cause the sticker to peel off. For best longevity, wait a full day before using the item.
5. Remove when needed: To remove the sticker, warm it with a hairdryer on low heat for about 30 seconds. Peel slowly from a corner. If residue remains, rub it off with a bit of oil or rubbing alcohol. Common mistake: peeling cold stickers leaves sticky residue behind.

What you are working with

• Mix n' Match Apparel Stickers: These Mix n' Match Apparel Stickers are a final sale item from Kortni Jeane, great for gifting and stocking stuffers. Because they are final sale, you want to apply them correctly the first time to avoid waste.